Road maintenance attachment for Skid Steer Loaders — cold planer, compactor, or trencher, CE marked to EN13309.
Models: 0223A70
HCN 0223 Pile Driver Extractor: CE-certified municipal attachment for skid steer loaders. Ideal for road repair, sweeping, and municipal maintenance. Key…
Factory-direct pricing · Responds within 24 hours
Submit RFQ FormThe 0223 Pile Driver Extractor from HCN Attachments Manufacture Co., Ltd is a heavy-duty skid steer / loader attachment engineered for global construction, municipal, and industrial OEM applications.
Typical specifications include Overall Width: 1720 · Overall Length: 883 · Overall Height: 1736-2536. Mounting interfaces, hydraulic flow, and working width are configurable to your carrier model.
Request technical drawings and an export quote at hcn-atta.com · CE certified · ISO 9001:2015 · worldwide shipping.
| Specification | Value / Range |
|---|---|
| Overall Length (mm) | 883 |
| Overall Width (mm) | 1720 |
| Overall Height (mm) | 1736-2536 |
| Total Weight (KG) | 785 |
| Working Height (mm) | 600-2600 |
| Operating Pressure (MPa) | 10-14 |
| Hydraulic Flow (L/min) | 40-70 |
| Blow Frequency (bpm) | 500-700 |
| Extraction Force (T) | 8 |
| Pipe Diameter Range (mm) | Φ100-Φ140 |
Specifications may vary by model. Custom configurations available. Request exact spec sheet →
The HCN 0223 Pile Driver Extractor is a municipal & road maintenance designed for installation on Skid Steer Loaders. It is manufactured at HCN Attachments' ISO 9001:2015-certified facility in Xuzhou, China, and supplied to contractors, rental fleets, OEM partners, and equipment distributors in more than 60 countries. When sourcing cold planer attachment, road milling machine, asphalt milling attachment, pavement scarifier, hydraulic trencher, road maintenance attachment, municipal attachment for export or fleet replacement, verify carrier weight class, hydraulic output, and mounting interface before order confirmation — HCN provides free compatibility checks on request.
HCN municipal and road maintenance attachments — hydraulic cold planers, road milling heads, asphalt patch cutters, scarifiers, sidewalk saws, and utility trenchers — equip municipal carriers, skid steers, and wheel loaders for professional pavement rehabilitation and infrastructure maintenance operations.
Available model designations: 0223A70. Specification values in the table below apply to the listed model range. If your carrier falls outside the published weight class, contact HCN engineering with the machine make, model, operating weight, and pin-to-pin dimensions — custom bracket fabrication is typically available within 15–30 working days.
HCN 0223 Pile Driver Extractor units leave factory with CE conformity documentation, operator manual, and QC records. Standard in-stock configurations ship within 7–15 working days; custom specifications require 15–30 working days. Export terms are quoted FOB Qingdao or Shanghai unless otherwise agreed. Submit an RFQ with your machine model, working conditions, and destination country for pricing, lead time, and bracket fit confirmation.
The 0223 Pile Driver Extractor is specified on the following project types. Each application below reflects real field use — not generic marketing claims.
On this type of project, the 0223 Pile Driver Extractor reduces cycle time compared with manual methods by allowing the operator to work from the carrier cab. Pothole patching and surface preparation — milling damaged asphalt before hot-mix or cold-patch repair
On this type of project, the 0223 Pile Driver Extractor reduces cycle time compared with manual methods by allowing the operator to work from the carrier cab. Full-lane and half-lane road surface milling before asphalt resurfacing operations
On this type of project, the 0223 Pile Driver Extractor reduces cycle time compared with manual methods by allowing the operator to work from the carrier cab. Sidewalk and crosswalk surface scarifying and road marking removal
On this type of project, the 0223 Pile Driver Extractor reduces cycle time compared with manual methods by allowing the operator to work from the carrier cab. Utility trench cutting for cable, pipe, and conduit installation in road corridors
On this type of project, the 0223 Pile Driver Extractor reduces cycle time compared with manual methods by allowing the operator to work from the carrier cab. Airport apron and taxiway FOD (Foreign Object Debris) groove cutting and surface profiling
Engineering and procurement teams typically evaluate the 0223 Pile Driver Extractor against these design and manufacturing attributes:
Factory-published values for the 0223 Pile Driver Extractor. Confirm final configuration against your carrier data sheet before purchase order release.
| Specification | Value / Range |
|---|---|
| Overall Length (mm) | 883 |
| Overall Width (mm) | 1720 |
| Overall Height (mm) | 1736-2536 |
| Total Weight (KG) | 785 |
| Working Height (mm) | 600-2600 |
| Operating Pressure (MPa) | 10-14 |
| Hydraulic Flow (L/min) | 40-70 |
| Blow Frequency (bpm) | 500-700 |
| Extraction Force (T) | 8 |
| Pipe Diameter Range (mm) | Φ100-Φ140 |
Specifications may vary by model. Custom configurations available. Request exact spec sheet →
Cold planers remove controlled depth of pavement; scarifiers roughen surfaces for overlay bonding. Many municipal maintenance programs use both in sequence.
| Selection Criteria | Cold Planer | Scarifier |
|---|---|---|
| Cut depth | 50–250 mm controlled depth per pass | Surface roughening; minimal depth removal |
| Best application | Pothole prep, lane milling, resurfacing | Surface texture, marking removal, bonding prep |
| Chip evacuation | Self-cleaning drum with spiral bit layout | Loose material; may require follow-up sweeping |
| Procurement note | Specify milling width to match repair zone | Lower cost for surface-only preparation |
Hand-held pavement breakers suit isolated potholes. Cold planer attachments are specified for lane-width milling, resurfacing prep, and repeatable municipal maintenance programs.
| Method | Manual / Conventional Approach | HCN Attachment |
|---|---|---|
| Typical use | Hand-held pneumatic pavement breaker — slow on lane-width areas, inconsistent depth control, high operator fatigue | Hydraulic cold planer on skid steer/wheel loader — controlled depth, W6/W1 carbide bits, cab-operated production rate 10–20× manual |
| When to specify | Specify a cold planer when milling area exceeds 50 m² per shift, depth control is specified in mm, or overlay bond requires uniform milled texture | |
When reviewing Municipal & Road Maintenance for a purchase decision, these parameters determine whether the unit will perform on your site:
The HCN 0223 Pile Driver Extractor is engineered for Skid Steer Loaders within HCN's rated weight and hydraulic output range. Send your exact carrier make, model, and pin-to-pin dimensions for a free compatibility confirmation before order placement. OEM-fit brackets are available for Caterpillar, Komatsu, Hitachi, Volvo, Doosan, Bobcat, and 30+ brands.
A cold planer attachment (also called a road milling machine, asphalt milling attachment, or pavement profiler) is a hydraulic attachment for skid steers, wheel loaders, or excavators. A rotating drum fitted with tungsten carbide cutting bits removes layers of asphalt or concrete pavement at ambient temperature — without heat — for road resurfacing preparation, pothole repair, joint cutting, and pavement profiling.
HCN cold planer attachments mill to a depth of 50–250 mm in a single pass depending on the model and pavement hardness. Cutting depth is adjusted hydraulically from the operator cab. For greater total depth, multiple passes are made with the drum stepping down incrementally.
HCN milling drums use standard W6 (35 mm diameter) and W1 (38 mm diameter) tungsten carbide conical cutting bits. These industry-standard bits are available from suppliers in every major market, so replacement does not require ordering proprietary HCN parts. Each bit is individually replaceable with basic hand tools.
21,000 m² manufacturing campus in Xuzhou ETDZ — CNC laser cutting, robotic welding, in-house heat treatment, and PLM-controlled production. 400+ models, 500+ patents, export to 60+ countries.
Tour our factory →ISO 9001:2015, ISO 14001, ISO 45001, CE conformity on export lines, and National High-Tech Enterprise status. Full documentation available for tender and OEM audit submissions.
View certifications →Documented deployments: highway compaction in Southeast Asia, airport snow management in Northern Europe, and open-pit rock breaking in Australia — with measurable results.
Read case studies →Not sure which attachment fits your machine? Read our selection guide · Procurement FAQ
Include your machine model, working conditions, and destination country — our sales engineers respond within 24 business hours with pricing, lead time, and bracket fit confirmation.
Explore related product lines, industry applications, field-proven case studies, and technical guides to support your procurement decision.
Search-intent resources for procurement teams — sizing, compatibility, and selection criteria before you request a quote.
Send your machine model and application — factory engineering responds within one business day.
